Tridak® Model 2200 Cartridge Filling System

Accurate and Consistent Filling of Single- & Dual-Component Syringes

CE Marked - Available Globally

The Model 2200 cartridge filling system offers accurate, and consistent filling of most single- and dual-component cartridges and syringes. These cartridges and syringes are typically used for packaging epoxies, dental materials, silicones, and pastes. This system is pneumatically operated and features an automatic, operator-initiated fill cycle with adjustable fill speed and level. The Model 2200 utilizes a bottom-up filling process with a special low-clearance nozzle to purge air during the filling process. This provides an accurate fill each time. The system also incorporates disposable fluid path technology. Materials travel from the reservoir to the fill nozzle through a disposable fluid path, sealing out any contaminates. The fluid path is easy to replace, allowing for the quick changeover of materials.

The system is most commonly fed from a stainless steel 5-, 10-, or 15-gallon reservoir containing a rigid or flexible polypropylene liner insert. The rigid reservoir liner insert can be treated as a permanent container or can be easily removed and covered to store the materials safely. The flexible liner is disposable, eliminating long-standing problems of clean-up. The system can also be fed from external tanks or drums using optional pumps.

Download LiteratureModel 2200 Cartridge Filling System User Guide
Download LiteratureModel 2200 Cartridge Filling System Product Bulletin
Download LiteratureTech Tip - Model 2200 Maximum Cartridge Size Guidelines
Download LiteratureFilling Project Requirement Questionnaire

Specifications

Operating Air Pressure 60-80 psi (0.41-0.55 MPa), 50 micron filtered, non-lubricated, dry air
Compatible Viscosity Range 1,000 - 100,000 cP
Compatible Sizes Cartridges and syringe barrels up to 500 mL
Maximum cartridge height: 7 in (18 cm)
Maximum cartridge/piston diameter: 2.5 in (6.5 cm)
Dimensions* (L x W x H) 16.25" x 16.25" x 27" (41.28 cm x 41.28 cm x 68.58 cm)
Recommended Spare Parts/Accessories T10015  Reservoir Liner Assembly, 5 Gallon
T15337  Reservoir Liner Assembly, 10 Gallon
T10105  Tridak® Standard Piston Inserter with 1 Set of Tooling

* Dimesions are for the system base without a reservoir attached.

 

 Request a Quote    |   Technical Support

 

  • Fills single- and dual-component cartridges and syringes one side at a time to prevent cross contamination
  • Utilizes disposable fluid path valve technology which eliminates cross-contamination and minimizes clean-up and downtime during product changeover
  • All pneumatic operation with automatic fill and shut-off
  • Bottom-up, void-free filling
  • Adjustable fill speed and fill level with consistent accuracy
  • Swing valve assures clean material shut-off and easy access for cleaning
  • Compatible with 5, 10, or 15 gallon reservoirs and can be adapted for feeding from a drum
  • Low cost 5, 10, or 15 gallon quick change polypropylene reservoir insert system that can be treated as permanent containers or, alternatively, can be easily removed to store materials in a safe economic manner

 

Available System Packages

All systems include the Model 2200 filling system outfitted with a Model 920 swing valve (T15196) and a selected reservoir. Select system based on fluid package used.

No
Reservoir
Pail Drop-In
Up to 5 GallonUp to 15 Liter
Straight or Tapered
T10071
RFQ
T17870
RFQ
T17871
RFQ