Tridak’s capabilities include the ability to solve unique manufacturing challenges including this example where a custom positive displacement valve with disposable fluid path working in conjunction with a vacuum tip to dispense a silicone thermal insulator for LED encapsulating.
Tridak’s capabilities include the ability to solve unique manufacturing challenges including this example showing five, Model 340 positive displacement valves with disposable fluid paths gang mounted in an automated system to dispense two-part silicone potting into a connector.
Tridak’s dispensing valves are easily integrated into automated production lines as shown in this example where a Tridak valve is mounted to an automated XYZ system programmed to apply a bead of gasketing material to a manufacturer’s part.
Tridak’s Model 2000 Cartridge Filling System offers void-free, accurate, and consistent filling of most single- and dual-component cartridges and syringes. This filling machine utilizes a bottom-up filling process combined with a special low-clearance nozzle design to eliminate air entrapment and provide a void-free, accurate fill each time.
The Tridak’s Model 2200 Cartridge Filling System offers void-free, accurate, and consistent filling of most single- and dual-component cartridges and syringes. This filling machine utilizes a bottom-up filling process combined with a special low-clearance nozzle design to eliminate air entrapment and provide a void-free, accurate fill each time.
Tridak’s Model 2200 Cartridge Filler used to down-pack material to cartridges. After filling one side of the cartridge, the operator inserts the cartridge into a Tridak Model 3100 Piston Inserter and precisely inserts even the most difficult pistons into the cartridge with a push of a footswitch.
Tridak’s Model 2400 High-Pressure Filling System accurately fills packages with extremely high-viscosity materials. Due to their high content of “filler”, these materials can be hard to dispense and can clog typical filling machines. The high-pressure filler uses a convection oven to lower the viscosity of the material and then routes materials through the system and into the containers using high pressure.
Tridak’s Model 3100 Piston Inserting Machine allows operators to insert pistons into cartridges and syringe barrels accurately and quickly. With an automatic air-bleed system to eliminate trapped air, and the ability to adjust the insertion depth of the pistons, this machine can be used to seal most syringes and cartridges. For use with 100 mL and smaller syringes and cartridges.
Tridak’s Model 3200 Piston Inserting Machine allow operators to insert pistons into cartridges and syringe barrels accurately and quickly. With an automatic air-bleed system to eliminate trapped air, and the ability to adjust the insertion depth of the pistons, this machine can be used to seal most syringes and cartridges.
Tridak’s Model 1000 Syringe Filler is a semi-automated syringe filling machine. This syringe filler is manually loaded and unloaded, making it ideal for low volume production or as an alternative to filling syringes manually. Watch as it fills a syringe in less than two seconds.
Tridak’s Model 1100 Syringe Filler is a semi-automated, dual syringe filling machine. Two syringes are handled simultaneously while the dispense cycles remain independent, making it possible to fill syringes with separate materials. This machine is compatible with a number of different size and style syringes.
Tridak’s Model 1200 Syringe Filler was designed to simultaneously fill both components of one, dual-component syringe or two, single-component syringes. This semi-automated syringe filler is also particularly useful for lower volume production or where frequent material change out is required.
